This adapter can be added when purchasing a new 1uO_c 4ROBOTS for 10$ only.

Adapter to connect 1uO_c 4ROBOTS or any other module with back USB port to Intellijel case with USB port (Pallete / Performance).

How to use:
1. Connect one end of the supplied gray ribbon cable to the 10 pins USB / MIDI port inside your Intellijel case (if you are unsure please check the user manual of your Intellijel case).

2. Connect the other end of the supplied gray ribbon cable to the adapter.
 
3. Use USB cable to connect the adapter to the desired module (the supplied cable will fit 1uO_c 4ROBOTS USB port on the back of the module). 
 
* 5v Jumper:
Some adapters are supplied with a 5v jumper, when this jumper is closed (connected to the 2 pins) the power from the USB is passed on to the module connected to the adapter.
When using with 1uO_c 4ROBOTS this jumper should be left open.
If you use the adapter for another module, please check the user manual of this module if USB power is required.